top of page

Load data for .219 Donaldson Wasp + .224 | 35gr | AERO SB,- smax:6.60

Recommended Powder(s): ADI AR 2207

.219 Donaldson Wasp + .224 | 35gr | AERO SB,- smax:6.60

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 35gr | AERO SB,- smax:6.60
Bullet Weight:
35gr | 2.3g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.575" | 14.6mm
Caliber:
.219 Donaldson Wasp load data
Case Length (l3):
1.810" | 46.0mm
Cartridge Length (C.O.L.):
2.177" | 55.3mm
Seated Depth:
0.208" | 5.3mm
Shank Seated Depth:
0.208" | 5.3mm
Case Capacity:
35.1 Grains of Water | 2.28 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40988 psi | 2826 bar
LID:
LID_B5_C105
Last updated:
2025-02-02

Load data for 24 loads in caliber .219 Donaldson Wasp with .224 | 35gr | AERO SB,- smax:6.60 bullet and 12 powders such as ADI AR 2207. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 36.9 fps

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
85%
36521
89%
**43
99%
[Accurate 2015]*
<<locked>>
94%
36347
89%
**78
94%
Alliant AR-Comp
<<locked>>
97%
36013
88%
**43
96%
Alliant Reloder-10x
<<locked>>
91%
36593
89%
**33
95%
Alliant Reloder-7
<<locked>>
83%
36289
89%
**58
95%
[Baschieri & Pellagri 106]*
<<locked>>
87%
36767
90%
**63
92%
Hodgdon TrailBoss
<<locked>>
96%
28108
69%
**74
100%
IMR 4198
<<locked>>
89%
36825
90%
**84
96%
Norma 200
<<locked>>
87%
36666
89%
**07
96%
ReloadSwiss RS 14
<<locked>>
96%
27514
67%
**16
100%
Vihtavuori N120
<<locked>>
87%
35940
88%
**68
99%
[Vihtavuori N130]*
<<locked>>
92%
35650
87%
**15
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
31575
77%
**92
97%
[Accurate 2015]*
<<locked>>
87%
28993
71%
**58
90%
[Alliant AR-Comp]*
<<locked>>
89%
27180
66%
**25
91%
[Alliant Reloder-10x]*
<<locked>>
83%
28181
69%
**68
91%
[Alliant Reloder-7]*
<<locked>>
81%
33910
83%
**86
94%
[Baschieri & Pellagri 106]*
<<locked>>
84%
33214
81%
**68
90%
Hodgdon TrailBoss
<<locked>>
81%
21973
54%
**80
100%
[IMR 4198]*
<<locked>>
81%
28863
70%
**38
92%
[Norma 200]*
<<locked>>
81%
29385
72%
**91
92%
ReloadSwiss RS 14
<<locked>>
81%
21524
53%
**26
100%
Vihtavuori N120
<<locked>>
81%
29718
73%
**87
97%
[Vihtavuori N130]*
<<locked>>
84%
27833
68%
**79
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page